Torqeedo Cruise 10.0 TS
Long
$14,062.53
Sale price
$14,062.53
Regular price
Skip to product information
Available as a special order — we’ll order it directly from our supplier when you place your order.
Torqeedo Cruise 10.0 TS
TORQ-1243-20
$14,062.53
Sale price
$14,062.53
Regular price
⚠️ IMPORTANT: BATTERIES NOT INCLUDED.
The Torqeedo Cruise 10.0 TS requires a compatible battery system for operation. This motor is designed for use with two or four Torqeedo Power 48-5000 Lithium Marine Batteries, sold separately.
The Torqeedo Cruise 10.0 TS is the flagship of Torqeedo's Cruise series, delivering 12 kW peak power and 10 kW continuous output — thrust comparable to a 20 HP gasoline engine. It propels efficient boats at speeds up to 30 km/h with zero emissions and near-silent operation.
Built for motorboats and sailboats up to 10 tons, the Cruise 10.0 TS combines German engineering with an integrated onboard computer and GPS-based range display that shows real-time speed, power draw, battery status, and remaining range.
Its corrosion-protected, seawater-ready aluminium housing, reinforced fin, and IP67 waterproof rating make it well suited to both commercial and recreational use.
Key Features
- 12 kW peak power / 10 kW continuous – comparable to a 20 HP petrol outboard
- Tiller control for intuitive, precise handling
- Smart onboard computer with GPS-based range display
- 48 V low-voltage system for safe, efficient operation
- Electrohydraulic tilt device with overload protection
- Manual 4-step trim for optimal positioning
- Reinforced aluminium pylon and fin for rugged durability
- Corrosion-resistant and fully waterproof (IP67)
- Compatible with Power 48-5000 battery systems (requires two or four batteries)
Performance – Cruise 10.0 TS with 2× Power 48-5000 Batteries
Tested on a displacement hull under ideal conditions.
| Speed Mode | Speed (kn / km/h)* | Range (nm / km)* | Running Time (h:mm)* |
|---|---|---|---|
| Slow | 4.2 kn (7.8 km/h) | 32 nm (60 km) | 6 h 00 m |
| Full Throttle | 14.0 kn (26.5 km/h) | 14 nm (26.5 km) | 1 h 00 m |
*Actual values depend on boat type, load, propeller, and environmental conditions.
Note: Propulsive power demand increases with the cube of speed — doubling speed requires 8× more power. The onboard computer continuously calculates real-time range from speed, battery charge, and GPS data, shown on the tiller or TorqTrac app.
⚙️ Technical Specifications
| Specification | Details |
|---|---|
| Input Power | 10,000 W |
| Peak Power | 12,000 W |
| Propulsive Power | 5,600 W |
| Comparable Gas Outboard | 20 HP (25 HP thrust) |
| Maximum Efficiency | 56 % |
| Static Thrust | ≤ 405 lbs |
| Voltage | 48 V |
| Total Weight | 60.3 kg (S) / 61.8 kg (L) / 63.0 kg (XL) |
| Shaft Lengths | S = 38.5 cm / L = 51.2 cm / XL = 63.9 cm |
| Propeller (Standard) | v22/p10k |
| Alternative Propellers | v32/p10k or v15/p10k |
| Max Propeller Speed | 1,400 rpm |
| Control | Tiller |
| Steering | 360° lockable |
| Tilt / Trim | Electric tilt (±45°) / Manual 4-step trim |
| Waterproof Rating | IP67 |
| Warranty | 2 years for non-commercial use |
Included Equipment
- Torqeedo Cruise 10.0 TS motor with tiller control
- Integrated onboard computer with GPS range display
- Magnetic kill switch
- 70 mm² battery cable with main switch (4.5 m)
- Standard propeller v22/p10k
- Sacrificial aluminium anodes (Al)
(Battery and charger sold separately)
Recommended Accessories
- Power 48-5000 Batteries (x2 or x4): Required for operation
- TorqLink Gateway (2217-00): Enables communication between components
- Spare Propeller (1916-00): Replacement for backup or travel use
- Anode Kit (1905-00): For saltwater corrosion protection